LS600 PRODUCT FEATURES |
Components: |
LF 1 x 15" (38cm) long excursion Neodymium 8§Ù driver. |
Height x Width x Depth |
435mm x 688mm x 528 mm (17.12" x 27.09" x 20.79"). |
Weight |
30 kg (66 Lbs) net. |
Connectors |
2 x NL4MP SPEAKON 4 pole. |
Construction |
Baltic Birch Ply & textured, polyurethane black coating. |
Fittings |
Handles 2 Metal recessed pockets. |
Flying Points |
One plate connecting with external accessories. |
Stand fittings |
Internal Steel Stand Fitting on Top (35mm, 1 3/8") allows pole mounting for 1 PS10-R2. |
SYSTEM SPECIFICATIONS LS600 with PS10 TDController-R2 |
Frequency Response |
40 Hz - 110 Hz ¡¾3dB. |
Usable Range @-6dB |
38 Hz - 120 Hz. |
Sensitivity 1W @ 1m |
101 dB SPL Nominal. |
Nominal Peak SPL @ 1m |
135 to 138 dB Peak. |
Crossover Frequencies |
120 Hz Active through PS10 TD Controller-R2. |
Nominal Impedance |
8 Ohms. |
Recommended Amplifiers |
1000 to 2000 Watts / 8 Ohms. |
SYSTEM OPERATION |
Electronic Controller |
The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS). |
|
Use without a properly connected Controller will result in poor sound quality and may damage the |
|
components. |
Subbass |
The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers. |
|
Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS. |
|
One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect. |
Speaker Cables |
The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through |
|
Speakons are present on both products. Single identical cables can thus be used to loop through |
|
combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of |
|
continual improvement, NEXO reserves the right to change specifications without notice. |
SHIPPING & ORDERING |
Packaging |
LS600 is packaged as a single product. |
Shipping Weight&Volume |
29.4 kg (64.68 lbs) / 0.265 cubic metres. |