SPECIFICATIONS | |
Frequency
Response @-6 dB | 45 Hz to 150
Hz |
Sensitivity 1W@1m | 102 dB SPL
Nominal |
Peak SPL@1m | 130 dB |
Crossover Frequency | 45-85 Hz,
45-120 Hz, 45-150 Hz |
Nominal Impedance | 6 ¥Ø |
Recommended Power | 450 to 700
Watts / 6 Ohms (requires a 700 to 1000 Watts / 4 Ohms amplifier) |
| |
FEATURES | |
LF
Component | 1 x
Neodymium 12" 6 Ohms long excursion |
Connectors | 2 pairs
(In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) |
Compatible cables section | Cables from
0.75 mm©÷ to 3.3 mm©÷ (AWG 18 to 12) copper section |
Compatible cables outside diameter | Cable with
maximum outside diameter of 9 mm |
Rigging points | 4 x pairs of
M10 rigging points (two on each side) |
Material | 15 mm thick
birch plywood body and Magnelis¢ç grille |
Finish | Black
structural paint (RAL9005 or Custom RAL upon request) |
Front Finish | UV &
Fire resistant acoustic fabric |
Height x Width x Depth | 365mm x
423mm x 450mm (14.4" x 16.7" x 17.7") |
Weight: Net | 14.5 kg (32
lbs) |
Operating temperature range | 0¡ÆC - 40 ¡ÆC
(32¡Æ F - 104¡Æ F) |
Storage temperature range | -20 ¡ÆC - 60
¡ÆC (-4 ¡Æ F - 140¡Æ F) |
IP Rating | IP54 |
Recommended powering solution | NXAMP4x1mk2
Powered TDcontroller: up to 2 x eLS400 per channel |
Optional powering solution | DTDcontroller
+ DTDAMP4x0.7 : 1 x eLS400 per channel |
| DTDcontroller
+ DTDAMP4x1.3 : 1 x eLS400 per channel |
| NXAMP4x2mk2
Powered TDcontroller: up to 3 x eLS400 per channel |
| NXAMP4x4mk2
Powered TDcontroller: up to 3 x eLS400 per channel
|